top of page
Pressroom hero.PNG

AUXILIARIES & PRESSROOM

In modern flexographic printing, performance is determined by more than the ink itself.

​

Ink behaviour, transfer, curing, surface characteristics, press conditions and equipment cleanliness all contribute to the consistency of the finished print.

​

KWorks Innovations supplies a focused range of UV and UV LED flexographic ink auxiliaries and pressroom products designed to support controlled production, from fine-tuning ink behaviour during the print process to maintaining the condition of critical press components after production.

​

Our auxiliary range includes UV and UV LED flexo ink reducer/extender, cure booster, defoamer/anti-foam and slip additive.

​

Our pressroom range includes heavy-duty and light-duty ink, anilox, plate and press cleaners, together with anilox, plate and press sanitiser.

​

Each product has a defined role within the printing environment.

The objective is not to introduce unnecessary chemistry into the process.

​

It is to provide the right auxiliary or maintenance product for the specific production requirement.

UNDERSTATED. DISTINCTIVE. PREMIUM.

INK CONTROL | CURING | FOAM CONTROL | SURFACE PERFORMANCE | CLEANING | PRESSROOM MAINTENANCE |

SMALL CHANGES. CONTROLLED PERFORMANCE.

A flexographic ink is a carefully balanced system.

​

Its behaviour can be influenced by viscosity, flow, surface characteristics, transfer conditions, curing or drying and the interaction between the ink, anilox, plate and substrate.

​

Auxiliaries can therefore play an important supporting role when a formulation or production process requires a controlled adjustment.

​

Industry flexographic guidance identifies additives such as diluents, defoamers and other functional additives as components used to influence ink behaviour and printing performance. For energy-curable inks, the formulation includes monomers and other additives that contribute to viscosity, flow and print characteristics. 

​

KWorks approaches auxiliaries as application-specific process tools, rather than generic additives.

​

The appropriate product, dosage and method of incorporation should always be determined from the applicable KWorks technical documentation and the actual ink, press and production conditions.

Pressroom layers.PNG
CONTROL

Adjust the ink without losing control of the system.

​

Ink adjustments need to consider the relationship between formulation, viscosity, flow, transfer and the printing conditions under which the ink is being used.

​

The purpose of an auxiliary is to make a controlled adjustment while maintaining the intended performance characteristics of the ink system.

COMPATIBILITY

The auxiliary must work with the ink system.

​

Not every additive is suitable for every ink.

​

The ink technology, formulation, application, curing system and finished application all influence auxiliary selection.

​

This is particularly important in UV and UV LED flexographic printing, where formulation and curing behaviour are closely interconnected. Industry technical guidance treats energy-curable inks as distinct systems in which the formulation, curing process and press conditions need to be considered together. 

PROCESS STABILITY

The objective is controlled production.

​

Changes to an ink system can influence transfer, appearance, curing, surface behaviour and downstream performance.

​

Auxiliary selection should therefore be based on the production requirement rather than simply the immediate symptom observed on press.

EQUIPMENT CONDITION

The press is part of the print system.

​

Anilox rolls, printing plates, ink chambers and other press components directly influence ink transfer and print quality.

​

Industry flexographic guidance identifies anilox condition and cleanliness, doctor-blade condition, plate condition, substrate characteristics and curing/drying systems among the variables affecting ink performance. 

MAINTENANCE

Clean equipment supports repeatable production.

​

Ink residue and contamination can affect equipment condition and subsequent print runs.

​

Cleaning chemistry therefore forms part of the wider pressroom process—not simply an end-of-shift housekeeping exercise.

​

Dedicated flexographic cleaning systems are commercially used for applications including anilox rolls, printing plates, ink metering systems and press equipment. 

SUPPORT FOR
ENERGY-CURABLE FLEXOGRAPHIC INKS

UV & UV LED FLEXO INK REDUCER / EXTENDER

KWorks UV and UV LED flexo ink reducer/extender is designed for controlled adjustment of the ink system where the production application requires modification of ink behaviour.

​

Depending on the specific formulation and intended use, reducer/extender technology can be used to influence characteristics such as rheology, flow, application behaviour and colour strength.

​

The correct addition level is product-specific and should be established according to the applicable KWorks technical documentation and production conditions.

​

INK RHEOLOGY · FLOW · TRANSFER · COLOUR STRENGTH · APPLICATION BEHAVIOUR · PRESS CONDITIONS

​

UV FLEXOGRAPHIC PRINTING · UV LED FLEXOGRAPHIC PRINTING · INK ADJUSTMENT · PRESS-SIDE PROCESS CONTROL​

UV & UV LED CURE BOOSTER

Curing is a critical stage in energy-curable flexographic printing.

​

KWorks UV and UV LED cure booster technology is designed to support the curing response of compatible UV and UV LED ink systems where additional cure performance is required.

​

The requirement for a cure booster can depend on factors including ink colour, film thickness, pigment loading, press speed, curing equipment, lamp output, substrate and production conditions.

​

INK SYSTEM · COLOUR · INK FILM · CURING ENERGY · UV / UV LED SYSTEM · PRESS SPEED · SUBSTRATE · PRODUCTION CONDITIONS

​

UV FLEXOGRAPHIC INKS · UV LED FLEXOGRAPHIC INKS

DEFOAMER / ANTI-FOAM

Uncontrolled foam can interfere with ink handling, metering, transfer and print consistency.

​

KWorks defoamer/anti-foam technology is designed to help control unwanted foam within compatible printing ink systems.

​

The appropriate defoamer depends on the ink chemistry, application method, equipment and production conditions.

​

FOAM CONTROL · INK FLOW · METERING · TRANSFER · SURFACE QUALITY · PROCESS STABILITY

​

FLEXOGRAPHIC INKS · INK CIRCULATION SYSTEMS · PRESS APPLICATIONS

SLIP ADDITIVE

Surface behaviour becomes particularly important when the printed material must move through subsequent production and converting stages.

​

KWorks slip additive is designed for compatible ink systems where controlled surface slip characteristics are required.

​

Slip additives can influence surface friction and related handling characteristics, but the actual effect depends on formulation, substrate, additive chemistry, concentration and subsequent processing.

​

SURFACE SLIP · COEFFICIENT OF FRICTION · SURFACE BEHAVIOUR · HANDLING · CONVERTING · OVERPRINTABILITY

​

FLEXOGRAPHIC PRINTING · FLEXIBLE PACKAGING · LABELS · PRINTED FILMS · CONVERTING APPLICATIONS

PRESSROOM & CLEANING

HEAVY-DUTY INK, ANILOX, PLATE & PRESS CLEANER

KWorks Heavy-Duty Ink, Anilox, Plate & Press Cleaner is intended for more demanding cleaning requirements where accumulated ink or process residue requires a stronger cleaning approach.

​

It is positioned for maintenance of relevant ink systems, anilox rolls, printing plates and press equipment, subject to compatibility with the specific material and equipment.

​

HEAVY INK RESIDUE · BUILT-UP CONTAMINATION · ANILOX MAINTENANCE · PLATE CLEANING · PRESSROOM MAINTENANCE

​

ANILOX ROLLS · PRINTING PLATES · INK SYSTEMS · PRESS COMPONENTS · PRESSROOM EQUIPMENT

LIGHT-DUTY INK, ANILOX, PLATE & PRESS CLEANER

KWorks Light-Duty Ink, Anilox, Plate & Press Cleaner is intended for routine pressroom cleaning and maintenance where regular removal of ink and process residue is required.

 

The objective is to support consistent equipment condition between production cycles without treating every cleaning requirement as a deep-cleaning operation.

​

ROUTINE CLEANING · INK RESIDUE · EQUIPMENT MAINTENANCE · PRESSROOM EFFICIENCY · PRODUCTION READINESS

​

ANILOX ROLLS · PRINTING PLATES · INK SYSTEMS · PRESS COMPONENTS · PRESSROOM EQUIPMENT

ANILOX, PLATE & PRESS SANITISER

KWorks Anilox, Plate & Press Sanitiser is designed for use as part of pressroom equipment-maintenance procedures where sanitising treatment is required.

​

It provides an additional step within the cleaning and maintenance process for relevant anilox rolls, printing plates and press equipment, subject to product-specific compatibility and application instructions.

​

PRESSROOM HYGIENE · EQUIPMENT MAINTENANCE · ANILOX · PLATES · PRESS SURFACES

​

ANILOX ROLLS · PRINTING PLATES · PRESS EQUIPMENT · PRESSROOM MAINTENANCE

STAY UPDATED, FOLLOW US

  • LinkedIn

Get the latest on our inks and coatings.

 

© 2026 KWorks Innovations. All rights reserved.

 

CONNECT WITH US

FOR TOP-TIER SOLUTIONS

bottom of page